 |
 |
 |
|
The Killer Bee™ MF103 (Black) is our CAD designed Plug and Play induction system for the LS3 and LS7. It has been designed to require no additional tuning, but if you tune your car, expect 31 to 35 RWHP total with the MF103. All the major engine builders use Halltech intakes on their dynos (Katech for example) for their R&D and highest horsepower numbers. Killer Bee™ MF103 Cold Air Induction is Halltech's high performance induction system requiring no tuning, no codes, no cutting, no water ingestion issues, which means you are warranty safe. It comes with the Beehive™ heat shield, which in itself conserves horsepower and torque by isolating the air filter and MAF sensor from the incredibly hot engine bay heat. Halltech's MF103 features our MAF forward (MF) design for perfect idle quality and MAF translation. We recommend NO HOLES under our filter. You will never get codes of any kind from our intake system. The Halltech Killer Bee™ MF103 is our plug and play 20 HP unit, measures 103 to 104mm at the MAF cross section, and is engineered to translate the MAF tables exactly like stock, eliminating tuning or closed loop MAF tuning.
Again, we do not recommend cutting any holes in your radiator shroud (in an attempt to get more air to the filter). It is not necessary, and will cause lean codes and surging.
We've got you covered if you favor a dry filter or an oiled filter. Choose from our 4 options:
- S&B Red Oiled Filter
- S&B Blue Dry Filter
- S&B Gray Oiled High-Flow Track Filter
- TKO Attack Blue Dry Nano Filter
Halltech does not have a CA EO number for this induction system, which means it is not legal for sale in CA, unless used in off-road application, such as track racing.
- C6 '05-'07 LS2
- C6 '06-'13 LS7 Z06
- C6 '08-'13 LS3
Packaging Information (when shipped alone) - Box Dimensions ... 26" x 14" x 10"
- Box Weight ........... 9 lbs
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Tuning Information
- The MF103 is our C6 plug-n-play system for the LS3 and LS7. It is designed to require no additional tuning as it has the same internal diameter of 103mm at the MAF sensor as the stock unit. Proper tuning, however, will result in an increase in horsepower and torque.
Halltech now offers remote tuning through our partners at PowerLabs Dyno & Tuning. Click this LINK to contact them and let them know Halltech sent you.
|
|
|
|
|
|
|
Halltech Black Killer Bee MF103 
