 |
 |
 |
 |
|
 |
|
Packaging Dimensions & Weight
- "Pop-On" Installation using stock locater tabs and rubber grommets
- Halltech™ Z06 Testing has shown an 35 degree difference in Intake Air Temps after idling for 1 minute with the shield in place, keeping important timing for off the line performance.
- 1 minute standing idle test shows a gain of only 9F to 11F at the IAT sensor with the shroud in place.
- Additional ram air effect and isolation of the intake system will allow better timing and leaner air fuel ratios for even better performance than the Killer Bee™ alone.
- 15 additional HP from timing conservation and ram air effect
- Hood seal to keep water out of Beehive and better seal than the stock hood seal
- Utilizes the stock NACA duct for cold air, but optional cutouts will provide ram air to the Killer Bee™
- No retuning required
|
|
|
|
|
|
|
Halltech heat shield 
